We offer challenging tasks – at all career levels. At the same time, you can develop yourself optimally. And feel comfortable.
Have we aroused your interest? Then send us your application. We look forward to receiving your application!
Current vacancies
Our employees are the basis of our success. If you see your perspective in a dynamic, innovative working environment with flat structures and pleasant teamwork, then please send your application documents to:
ITK Dr. Kassen GmbH
Claudia Dern
At the Eberacker 3
35633 Lahnau
Here you can find the job offers:
Would you like to learn something practical after leaving school and experience what everyday working life in a company is like? Then you should think about vocational training. The most important prerequisite for starting a 3.5-year apprenticeship with us is a good to very good secondary school diploma, or even a high school diploma. You should also have a fair amount of initiative.
We are looking for trainees for the following professions:
• Mechatronics technician
• Industrial mechanic
• Machinist
It is important to us that our future trainees enjoy a high quality standard during the entire training period. We therefore work very closely with the company Pro Zukunft- Aus- und Weiterbildung e.K. from Wetzlar.
After you have successfully completed your training, we would like to retain you in our company for the long term.
We are always looking for temporary workers in the field of electronics production, mechanical assembly of individual components or positioning systems. You should have a certain level of manual skills and an interest in the manufacture of technical products. Ideally, you are flexible in terms of time and willing to consider hourly working models.
Are you studying a MINT subject and would like to gain your first practical experience? With a student internship at ITK you will gain an insight into the different areas of our company and find out which activities suit you. For the development area, you should bring at least four weeks of time with you and have completed your basic studies, because you will implement a small project during your internship. The same applies to internships in the commercial area: four weeks is the minimum.
If you want to get a taste of practical experience over a longer period of time during your studies and lay the foundation for a later career entry, ITK offers you a job as a working student. Ideally, you will have already completed an internship with us – in mechanics, electronics, hardware or software development. As a working student, you should have at least eight hours per week during the semester or several weeks at a time during the semester break. This allows us to plan better and gives you a sound insight into our processes.
You have not found a suitable position for you among our vacancies? You are welcome to send an unsolicited application to join ITK Dr. Kassen GmbH by e-mail to Claudia Dern c.dern@itknet.de
ITK Dr. Kassen GmbH
Beim Eberacker 3 | D-35633 Lahnau
SIE MÖCHTEN AUF DEM LAUFENDEN BLEIBEN?
DANN ABONNIEREN SIE UNSEREN NEWSLETTER!
Sie interessieren sich für unsere Produkte?
Sie möchten mit uns gemeinsam nach einer Lösung
Ihrer Aufgabe suchen?
Dann schreiben Sie uns.
Wir freuen uns auf einen konstruktiven Austausch!
YOU WANT TO STAY UP TO DATE?
THEN SUBSCRIBE TO OUR NEWSLETTER!
Are you interested in our products?
Would you like to work with us to find a solution
for your task?
Then contact us.
We look forward to a constructive exchange!
Main features
• Available as built-in variants without housing
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Repeatability | µm | 0.1 … 50 |
Traversing speed | mm/s | 0.01 … 5000 |
Acceleration | mm/s2 | 100 mm/s2 … 5 g |
Position resolution | nm | 5 … 1000 |
Travel path | mm | 10 … 500 |
Technical Data
Parameter | Unit | Typical performance features |
|---|---|---|
Travel speed | mm/s | 0.1 … 500 |
Acceleration | mm/s2 | ≤ 1000 |
Repeat accuracy | µm | different classes |
Position resolution | nm | 5 |
Travel range | mm | 50 x 50 … 205 x 205 |
Technical Data
Parameters | Typical performance characteristics |
|---|---|
Scale lengths | 50 - 5000 mm |
Materials | hard magnetic, elastomer-bonded and plastic bonded material |
Track widths | 1 - 5 mm |
Number of tracks | 1 - 3, several coded tracks possible |
Period lengths | 500 - 5000 µm |
Accuracy | up to the sub-µm range (compensated) |
Resolution | in the nanometre range |
Writing method | digital or analogue |
Software | customised operating and evaluation software |
Quality inspection | scale measurement on the same system |
Typical operating conditions | industrial continuous operation (24/7) |
Labelling | each scale can be individually marked |
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Repeatability | arcsec | 2 … 36 |
Axial runout | µm | 3 … 10 |
Radial runout | µm | 3 … 20 |
Mass to be moved | kg | 5 … 10 |
Hollow shaft | mm | 40 … 50 |
Diameter | mm | 100, 200 |
Main features
We can offer you stepper motors in a wide range of performance classes and torque curves. It does not matter whether in an industrial environment in clean rooms or in a dirty environment.
Key features
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Repeatability | arcsec | 2 … 36 |
Axial runout | µm | 3 … 10 |
Radial runout | µm | 3 … 20 |
Mass to be moved | kg | 5 … 10 |
Hollow shaft | mm | 40 … 50 |
Diameter | mm | 50 … 300 |
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Load capacity | kg | 0.5 … 5 |
Travel speed in X & Y | m/s | 0.25 ... 1 |
Acceleration in X & Y | m/s2 | 0.5 … 10 |
Repeatability bidirectional | µm | ≤ ±1 |
Positioning accuracy bidirectional | µm | ≤ ±20 … ≤ ±80 |
Resolution | nm | 500 |
Technical Data
Parameter | Typical performance characteristics |
|---|---|
Scale diameter | 3.5 - 500 mm (standard) |
Scale materials | hard magnetic, elastomer and plastic bonded material |
Coding placement | optional radial or axial description |
Number of lines | freely selectable |
Number of tracks: | several coded tracks possible; reference marks (polarisation adjustable) |
Repeatability: | from 5 arcsec (depending on reference measuring system and material) |
Resolution | up to 0.5 arcsec |
Writing method | digital or analogue |
Software | customised operating and evaluation software optional |
Quality inspection: | scale measurement on the same system optional |
Typical conditions of use | industrial continuous operation (24/7) |
Marking | each scale can be individually labelled. |
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Repeat accuracy | µm | 0.1 … 50 |
Traversing speed | mm/s | 0.01 … 5000 |
Acceleration | mm/s2 | 100 mm/s2 … 5 g |
Position resolution | nm | 5 … 1000 |
Travel path | mm | 10 … 10.000 |
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Repeatability | µm | 0.1 … 50 |
Traversing speed | mm/s | 0.01 … 5000 |
Acceleration | mm/s2 | 100 mm/s2 … 5 g |
Position resolution | nm | 5 … 1000 |
Travel path | mm | 10 … 10000 |
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Repeatability | µm | 0.1 … 50 |
Traversing speed | mm/s | 0.01 … 5000 |
Acceleration | mm/s2 | 100 mm/s2 … 5 g |
Position resolution | nm | 5 … 1000 |
Travel path | mm | 10 … 500 |
Main features
Key features
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
DC link voltage | Vac | 0 … 48 |
Max. Phase current | A | 2,5 … 50 |
Supported motor types | mm/s2 | Linear-, Stepper-, Voice Coil- Servo-, DC-Motoren |
Position resolution | nm | 5 … 1000 |
Real-time trigger | ✓ | |
Interface compatibility | ✓ | |
Manual control units | ✓ | |
Safety functions | ✓ |
Main features
Main features
Main features
Main features
Main features
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
DC link voltage | Vac | 0 … 48 |
Max. Phase current | A | 2,5 … 50 |
Supported motor types | mm/s2 | Linear-, Stepper-, Voice Coil- Servo-, DC-Motoren |
Position resolution | nm | 5 … 1000 |
Real-time trigger | ✓ | |
Interface compatibility | ✓ | |
Manual control units | ✓ | |
Safety functions | ✓ |
Main features
Main features
Main features
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
DC link voltage | Vac | 0 … 48 |
Max. Phase current | A | 2,5 … 50 |
Supported motor types | mm/s2 | Linear-, Stepper-, Voice Coil- Servo-, DC-Motoren |
Position resolution | nm | 5 … 1000 |
Real-time trigger | ✓ | |
Interface compatibility | ✓ | |
Manual control units | ✓ | |
Safety functions | ✓ |
Technical Data
Parameter | Unit | Typical performance characteristics |
|---|---|---|
Travel speed in X | m/s | 0.5 … 2.5 |
Travel speed in Y | m/s | 0.5 … 0.8 |
Acceleration in X | m/s2 | 5 … 50 |
Acceleration in Y | m/s2 | 0.5 … 5 |
Repeatability bidirectional | µm | ≤ ±0.5 … ≤ ±2.5 |
Positioning accuracy bidirectional | µm | ≤ ±10 … ≤ ±50 |
Resolution | nm | 50 … 500 |
